HPE OfficeConnect 1950 48G 2SFP+ 2XGT Switch (JG961A)


Sale priceRM5,459.00 MYR

Shipping calculated at checkout

Sold out
Contact us


HPE OfficeConnect 1950 48G 2SFP+ 2XGT Switch (Local Warranty in Malaysia)
HPE - This Is Fame

Product overview

The HPE OfficeConnect 1950 Series is a smart Web-managed 10-Gigabit and Gigabit platform for advanced small business networks needing the highest performance now or in the future.

The HPE OfficeConnect 1950 Switch Series includes five switches: New to the series is a 16-port 10-Gigabit aggregation switch that has 12 10GBASE-T and 4 SFP+ ports, which is ideal as the core of a high performance workgroup or small business network. Additional series models have Gigabit access ports with 10-Gigabit uplinks, including two standard and two PoE+ models in 24- and 48-port configurations.The access switches each have two 10GBASE-T ports supporting copper- based Category 6A-based cabling, and two 10G SFP+ ports for fiber connectivity. The PoE+ models both have a PoE power budget of 370 W to power up PoE/PoE+ compliant client devices.

The HPE OfficeConnect 1950 Switch Series has an intuitive Web-based interface for simple customization of network operation. It supports true stacking—of two aggregation switches and separately of up to four access switches—with multiple units logically administered as a single entity, simplifying administration while supporting greater network redundancy. Models support both rack mounting and desktop operation. These switches have IPv4 and IPv6 operation, with Layer 2 switching as well as Layer 3 static routing. Other features include: link aggregation to boost link performance; VLANs, Access Control Lists, and 802.1X network login for enhanced security; and three versions of Spanning Tree Protocol (STP) for added network resiliency. HPE OfficeConnect 1950 Switch Series includes a Limited Lifetime Warranty.

Key features

  • 10G Connectivity for fast network to servers and storage
  • Combination of SFP+ and 10GBASE-T ports supports fiber and cost-effective copper connectivity
  • True stacking allows for redundancy while simplifying administration
  • Customized operation using intuitive Web interface
  • Limited lifetime warranty

Features and benefits


  • True stackingSimplifies administration of multiple devices. Create a single logical managed unit with up to two HPE 1950 aggregation switches and up to four HPE 1950 access switches. Balance connections across multiple units with standard Link Aggregation (LACP) for enhanced network resiliency. Stack using affordable Cat 6A, or long distance fiber, or localized DAC cables. Stacked units can be co-located or separated physically
  • Intuitive Web browser-based managementAllows for easy customization of the switch—even by non-technical users
  • Secure Web-management sessions with HTTPS/SSLEncrypts and otherwise protects management sessions through HTTP Secure (HTTPS). Prevents snooping of sensitive management information such as passwords
  • SNMPv1, v2c, and v3Facilitates remote management of the switch, as the device can be discovered and monitored from an SNMP management station
  • Complete session loggingProvides detailed information for problem identification and resolution
  • Dual flash imagesProvides independent primary and secondary operating system files for backup while upgrading
  • Port mirroringEnables traffic on a port to be simultaneously sent to a network analyzer for monitoring
  • Network Time Protocol (NTP)Synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)Advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
  • Limited Command Line Interface (CLI)Facilitates the deployment and initial configuration of the unit. Supports troubleshooting actions as well
  • RMONProvides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
  • Default DHCP client modeSimplifies device deployment. Connect a new out-of-the-box switch to a network with a DHCP server and the device will obtain its IP address automatically with plug-and-play operation. In the absence of a DHCP server, the switch will fall back to a unique static address determined by the switch’s MAC address
  • Cable diagnostic toolUsed to remotely detect cable issues with cables attached to the switch

Quality of service (QoS)

  • Traffic prioritizationMakes it possible to prioritize important and/or time-sensitive traffic ahead of less important traffic. Use with VoIP or video to optimize its performance on the network. Recognizes both IEEE 802.1p and DSCP prioritization tagging. Packets are mapped to eight hardware queues for more effective throughput
  • Broadcast controlAllows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
  • Rate limitingSets per-port ingress enforced maximums and per-port, per-queue minimums
  • Powerful QoS feature Supports the following congestion actions: strict priority queuing (SP), weighted round robin (WRR) queuing, and SP+WRR


  • Auto-MDI/MDIX - Adjusts automatically to straight-through or crossover cables on all 10/100/1000 and 10GBASE-T ports
  • IEEE 802.3X flow control - Provides a configurable flow throttling mechanism propagated through the network to prevent packet loss at a congested node
  • Packet storm protection - Protects against broadcast, multicast, or unicast storms with user-defined thresholds
  • Jumbo frame supports up to 10-kilobyte frames - Improves efficiency of data transfers by allowing more data into a given packet. This is especially useful for transfers of large amounts of data. HPE 1950 Switches support up to 10-kilobyte frame sizes
  • IEEE 802.3at Power over Ethernet (PoE+) - Delivers power to compliant devices over Ethernet cabling, greatly simplifying installation of those devices. The HPE 1950 Series has two PoE+ enabled models. The PoE+ 802.3at standard supports delivery of up to 30 watts of power to the attached devices, enough to support the latest models of IP phones, Wireless Access Points, video surveillance cameras, or other PoE/PoE+ enabled devices. HPE 1950 PoE+ models support 370 W of total PoE power
  • IEEE 802.3af Power over Ethernet (PoE) ready - Delivers power to compliant devices over Ethernet cabling, greatly simplifying installation of those devices. HPE 1950 PoE+ models are fully backward compliant with the older PoE standard which provides up to 15.4 W of PoE power per port to attached devices
  • Available redundant power for aggregation and PoE+ models - Optional Redundant Power System is available to add power redundancy and to supplement the PoE power of the PoE+ switches. With the optional RPS, the switch will continue operating even if the unit internal power supply fails; additionally, the PoE+ power budget can be increased to 740 Watts on 24-port PoE+ model and 800 Watts on 48-port PoE+ model


  • Access Control Lists (ACLs) - Gives granular control over what traffic goes where in the network. Allows for traffic filtering. ACLs rules can be based on MAC-address or IP-address. ACL rules can be time-based to implement access control during certain hours or days
  • IEEE 802.1X and RADIUS network logins - Controls port-based access for authentication and accountability
  • Port isolation - The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
  • ARP attack protection - The ARP detection feature enables access devices to block ARP packets from unauthorized clients to prevent user spoofing and gateway spoofing attacks


  • Half-/full-duplex auto-negotiating capability on every port doubles the throughput of every port
  • Selectable queue configurations - Allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
  • IGMP/MLD Snooping - Improves network performance by filtering multicast traffic when there is no multicast receiver on a connection. Without this, multicast traffic is flooded to all ports. IGMP snooping is used in IPv4 networks. The IPv6 equivalent—MLD Snooping—is also supported
  • 10-Gigabit SFP+ based Fiber ports - Supports high-bandwidth connections over fiber. HPE 1950 Switches come with SFP+ transceiver slots supporting 10-Gigabit fiber-based connections using optional 10G transceivers. Fiber is particularly suited for connecting at distances beyond the 100 Meter limitation of copper-based Cat 6A cabling. Alternatively use the SFP+ ports for redundant stacking using Direct Attached Cables (DAC)
  • 10-Gigabit 10GBASE-T RJ45 ports - Supports high-bandwidth connections over Cat 6A cabling. HPE 1950 Switches come with 10GBASE-T RJ45 ports supporting 10-Gigabit copper-based connections. Cat 6A is economical and practical for distances up to 100 Meters. Alternatively use the 10GBASE-T ports for redundant stacking

HPE OfficeConnect 1950 Switch Series


JG961A Specifications


HPE OfficeConnect 1950 48G 2SFP+ 2XGT Switch

I/O ports and slots

  • · 48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
  • · 2 SFP+ fixed 1000/10000 SFP+ ports
  • · 2 RJ-45 1/10GBASE-T ports

Additional ports and slots

1 RJ-45 console port to access limited CLI port

Memory and processor

128 MB flash

Packet buffer size: 3 MB


Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)


  • IMC - Intelligent Management Center
  • Limited command-line interface
  • Web browser
  • SNMP Manager
  • RMON1
  • FTP
  • Supported by HPE IMC and generic SNMP management platforms. Refer to documentation for MIB support details.

Dimensions (H x W x D)

4.4 x 44 x 27 cm (1.73 x 17.32 x 10.63 in) (1U height)


5 kg (11.02 lb)

100 Mb Latency

< 5 µs

1000 Mb Latency

< 5 µs

10 Gbps Latency

< 1.5 µs


up to 130.9 Mpps (64-byte packets)

Routing/Switching capacity

176 Gbps

Routing table size

32 entries (IPv4), 32 entries (IPv6)

MAC address table size

16384 entries


50/60 Hz


100 - 240 V ac, rated

Maximum power rating

54 W1

PoE power


Operating temperature

0°C to 45°C (32°F to 113°F)

Operating relative humidity

10% to 90%, noncondensing

Nonoperating/Storage temperature

-40°C to 70°C (-40°F to 158°F)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing


up to 5 km (16,404 ft)


Low-speed fan: 38.4 dB, High-speed fan: 47.0 dB; ISO 7779 Dual speed fan


UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1


FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A

Device management


General protocols

IEEE 802.1D MAC Bridges

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1p Priority


IEEE 802.1s Multiple Spanning Trees

IEEE 802.1W Rapid Spanning Tree Protocol

IEEE 802.1X

IEEE 802.3 Type 10BASE-T

IEEE 802.3ab 1000BASE-T

IEEE 802.3ad Link Aggregation Control Protocol (LACP)

IEEE 802.3af Power over Ethernet

IEEE 802.3at PoE+

IEEE 802.3i 10BASE-T

IEEE 802.3x Flow Control

IEEE 802.3z 1000BASE-X



RFC 1493 Bridge MIB


RFC 2233 Interface MIB

RFC 2233 Interfaces MIB

RFC 2571 SNMP Framework MIB


RFC 2573 SNMP-Notification MIB

RFC 2573 SNMP-Target MIB


RFC 2618 RADIUS Client MIB

RFC 2620 RADIUS Accounting MIB

RFC 2665 Ethernet-Like-MIB

RFC 2667 IP Tunnel MIB

RFC 2668 802.3 MAU MIB

RFC 2674 802.1p and IEEE 802.1Q Bridge MIB

RFC 2737 Entity MIB (Version 2)

RFC 3414 SNMP-User based-SM MIB

RFC 3415 SNMP-View based-ACM MIB

RFC 3418 MIB for SNMPv3

Network management

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

IEEE 802.1D (STP)

RFC 1215 SNMP Generic traps


IEEE 802.1p (CoS)


IEEE 802.1X Port Based Network Access Control


HPE OfficeConnect 1950 Switch Series Data Sheet

Other Model For L2 Plus Smart Web Managed

More Series For HPE Switch

  1. Unmanaged Plug & Play
  2. L2 Smart Web Managed

Aruba Series Switch

  1. L2 Plus Smart Web Managed
  2. Layer 2 Edge Switches (100Base)
  3. Layer 2 Edge Switches (Gigabit)

You may also like

Recently viewed