APC Easy UPS On-Line, 1000VA/900W, Rackmount 2U, 230V (SRV1KRI-E)
APC Easy UPS On-Line standard features and applications
Easy UPS On-Line 1000 – 3000 VA
Built-in batteries for Plug-and-Play will provide a standard battery backup power for the connected equipment suitable for compact installations where floor or desk mount is required.
Built-in batteries for Plug-and-Play will provide a standard battery backup power for the connected equipment suitable for standard 19-inch rack installation which occupies only 2U rack space.
True online double-conversion
Ensures clean, reliable power supply to essential loads from brownouts, line noise, voltage transients and power outages.
High Power Factor
Output power factor up to 0.9 Powers more servers than similar UPSs with equivalent VA ratings with lower power factors.
Generator-compatible with a wide Input Frequency range (40 – 70 Hz) ensures clean, uninterrupted power to the loads during power outage.
Up to 88 – 90% efficiency in online double conversion mode and 93 – 94% in ECO mode which saves utility and cooling costs without compromising performance or reliability.
Conformal coated to help protect the components from the elements, including moisture, dust and extreme temperatures.
Cold Start Capability
Enables user to power up connected equipment’s on battery mode when utility power is not available.
2 year warranty on UPS
Comprehensive warranty for electronics and battery functionality provides peace of mind. In an unlikely event of a detected fault or error, your product will be repaired or replaced quickly
Wide Input Voltage Range
1000 – 3000 VA/110 – 285 Vac, works in unstable power conditions and minimizes transfer to battery
Intuitive interface provides detailed and accurate information about UPS status with ability to configure locally.
Built-in Automatic Bypass
Ensures seamless power to the load even in the event of UPS internal detected fault or error.
Emergency Power Off (EPO)
Remote UPS shutoff in the event of a fire or other emergency. The UPS can accept normally closed (NC) contacts.
|Main Input Voltage||230 V|
|Other Input Voltage||220 V
|Main Output Voltage||230 V|
|Other Output Voltage||220 V
|Rated power in W||900 W|
|Rated power in VA||1000 VA|
|Input Connection Type||IEC 60320 C14|
|output connection type||3 IEC 60320 C13|
|Number of rack unit||2U|
|Cable length||1.5 m|
|Number of cables||1|
|Provided equipment||1 IEC 60320 C13 to Schuko power cable
1 IEC 60320 C13 to C14 power cable
1 USB cable
1 RS-232 configuration cable
1 rack mounting brackets
1 user manual
|Max runtime||3 min|
|Number of power module filled slots||0|
|Number of power module free slots||0|
|Colour||Black (RAL 7010)|
|Net weight||11.5 kg|
|Mounting mode||Rack-mounted with kit|
|Input voltage limits||110...285 V half load
180...285 V full load
|Network frequency||40...70 Hz auto sensing|
|Maximum configurable power in VA||1000 VA|
|Maximum configurable power in W||900 W|
|Output frequency||50/60 Hz +/- 3 Hz sync to mains|
|Harmonic distortion||3 %|
|UPS type||Double conversion online|
|Wave type||Sine wave|
|Efficiency||88 % (full load)|
|additional information||Configurable for 220 : 230 or 240 nominal output voltage|
|bypass type||Internal bypass (automatic and manual)|
|Crest factor||3 : 1|
|Ambient air temperature for operation||0…40 °C|
|Relative humidity||0…95 % non-condensing|
|Operating altitude||0...3000 m|
|Ambient air temperature for storage||-20…50 °C|
|Storage Relative Humidity||0…95 % non-condensing|
|Storage altitude||0…15000 m|
|Acoustic level||50 dBA|
|Heat dissipation||380 Btu/h|
|IP degree of protection||IP20|
|Alarm||Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm|
|control panel||Multifunction LCD status and control console|
|Surge energy rate||945 J|
|Unit Type of Package 1||PCE|
|Number of Units in Package 1||1|
|Package 1 Height||21.8 cm|
|Package 1 Width||55.1 cm|
|Package 1 Length||45.5 cm|
|Package 1 Weight||14 kg|
|Warranty||2 years repair or replace|